Here are a few clever cheap current detection circuits.
1, triode current detection circuit
If the transistor is simply turned on and off to detect the current, the transistor should be turned on to about 0.7V. When the current is small, the resistor needs to be used in large series, and a large feedback voltage is wasted. As shown in the above figure, it can be used relatively small. The resistance can be detected by consuming a small voltage, and the sensitivity of the detection can be adjusted by adjusting the resistance of the triode base. This circuit can be used in places such as chargers that need to display the presence or absence of charging current.
2, high sensitivity current detection circuit
This circuit uses two diodes for current sampling. The sensitivity is very high. The current can be used in a wide dynamic range. It is suitable for high-power or high-voltage applications. The disadvantage is that the voltage needs to be damaged by about 1.4V.
3, TL431 current feedback circuit
The TL431 is inexpensive and widely used in the feedback loop of the switching power supply, but its FB voltage is 2.5V. It is a large sampling resistor used for current feedback and wastes voltage. In the figure, the current feedback is realized by two TL431s, and the precise current feedback can be realized with a relatively small sampling resistor. If there is a voltage feedback network, the voltage feedback circuit of U3 is connected.
Perfect fit: The Hydrogel Screen Protector is designed with a Soft TPU material, which can be completely covered even on a curved device, providing perfect protection for the full coverage of the screen.
Oleophobic and waterproof: The use of hydrophobic and oleophobic screen coatings can prevent sweat, grease residue and fingerprints without reducing screen sensitivity. It is almost invisible on the screen and brings a high-definition visual experience.
Sensitive touch: ultra-thin and Soft Hydrogel Film with a thickness of only 0.14mm. As time goes by, it will self-repair minor scratches, provide you with a highly responsive screen protector and maintain the original touch.
Easy to install: The installation of the Protective Film is very simple, without air bubbles. The protective sticker can stay on the phone perfectly, and the bubbles will disappear within 24 hours.
If you want to know more about Hydrogel Screen Protector products, please click the product details to view the parameters, models, pictures, prices and other information about Hydrogel Screen Protective Film.
Whether you are a group or an individual, we will try our best to provide you with accurate and comprehensive information about the Hydrogel Protective Film!
Hydrogel TPU Protective Film,Ultra-Thin Protective Film,Soft Hydrogel Film,Hydrogel Film Screen Protector,Screen Protective Film,Mobile Phone Screen Guards
Shenzhen Jianjiantong Technology Co., Ltd. , https://www.jjtbackskin.com