The Toyota factory in the United States recently announced that the 2018-generation Toyota Camry will be officially put into production at the Toyota plant in Kentucky, USA, and the Camry is also the first TNGA (Toyota New Global Architecture) to be designed in North America and directly produced in North America. The new generation of modular chassis models, and now in addition to the Prius Prius and CH-R, the new generation Camry is the third car designed with this chassis, is expected to significantly improve the dynamic performance and energy efficiency of the Camry.
In order to meet the mass production of the new generation of Camry, Toyota has invested a total of up to 1.3 billion US dollars in new plant expansion and equipment construction, and also recruited about 700 employees to cope with the new Camry. Production, the current total number of employees in the Kentucky plant area is about 8,000, and also significantly increased the total production of new cars in the Kentucky plant.
In the future, the new Camry will offer three power options: a 2.5-liter four-cylinder direct-injection engine (maximum horsepower 206hp), a 2.5-liter four-cylinder Hybrid power system (maximum horsepower 176hp), and a 3.5-liter V6 in-cylinder direct injection D -4S natural intake engine (maximum horsepower 301hp), in addition to the Hybrid model with CVT stepless transmission system, the other two models are equipped with their own new Direct-Shift eight-speed manual transmission.
In addition, the original factory also announced the car model and price, the three powers provide a total of 10 models to choose from, the most popular 2.5-liter four-cylinder model is priced at US$24,380 (equivalent to about 165279 yuan) ), the 3.5-liter V6 model is US$35,285 (equivalent to approximately RMB239,207), and the Hybrid oil-electric model is US$28,685 (equivalent to RMB194,464), which is expected to be under this year. Delivery started half a year.
Most of Toyota’s explosions in the United States have indeed taken a while.
Innosilicon Machine:Innosilicon A10 ETHMaster (500Mh),Innosilicon A10 Pro ETH (500Mh),Innosilicon A10 Pro+ ETH (750Mh),Innosilicon A11 Pro ETH (1500Mh)
Innosilicon is a worldwide one-stop provider of high-speed mixed signal IPs and ASIC customization with leading market shares in Asian-Pacific market for 10 consecutive years. Its IP has enabled billions of SoC's to enter mass production, covering nodes from 180nm to 5nm across the world`s foundries including: GlobalFoundries, TSMC, Samsung, SMIC, UMC and others. Backed by its 14 years of technical expertise in developing cutting-edge IPs and ASIC products, Innosilicon has assisted our valued partners including AMD, Microchip and Microsoft to name but a few, in realizing their product goals.
Innosilicon team is fully devoted to providing the world's most advanced IP and ASIC technologies, and has achieved stellar results. In 2018, Innosilicon was the first in the world to reach mass production of the performance-leading GDDR6 interface in our cryptographic GPU product. In 2019, Innosilicon announced the availability of the HDMI v2.1 IP supporting 4K/8K displays as well as our 32Gbps SerDes PHY. In 2020, we launched the INNOLINK Chiplet which allows massive amounts of low-latency data to pass seamlessly between smaller chips as if they were all on the same bus. With a wide range of performance leading IP in multiple FinFET processes and 22nm planar processes all entering mass production, Innosilicon's remarkable innovation capabilities have been proven in fields such as: high-performance computing, high-bandwidth memory, encrypted computing, AI cloud computing, and low-power IoT.
Innosilicon Machine,A11 Pro 1500M Miner,Asic Miner A11 Pro 8G,A11 Pro 8G 1500Mh,ETC miner
Shenzhen YLHM Technology Co., Ltd. , https://www.asicminer-ylhm.com