In the car audio modification, the modification of the amplifier and the Speaker is very important. Of course, the position and layout of the audio equipment installation will have a great impact on the sound effect. Below we briefly introduce how the car audio is cleverly laid out.
Car sound insulation - car door
The biggest difference between listening to music in a car and enjoying music at home is that the car is moving fast. In order to achieve good results, this puts higher demands on the audio equipment, and the wind noise when the vehicle is driving at high speed. , tire noise and mechanical noise can cause interference to the sound system. Therefore, the vehicle needs to be modified. Generally, the door is selected for shock and sound insulation. Door noise can be done in many car modification stores.
Generally, a soft foaming sponge is used to seal the door cavity. The best effect is to use a professional shock plate, but the cost of the shock plate is much higher than that of the foam sponge.
When the speaker position is car audio, the high, medium and low speakers must be independent. If they are installed together, they will only interfere with each other. If a car owner is modifying his car audio, the Tweeter is mounted on both sides of the A-pillar, the mid-range speaker is mounted on both sides of the center console, and the mid-Woofer is mounted on the bottom of the front door. According to the introduction of the modified technician, this is conducive to the connection between the middle and high sounds, forming an accurate positioning of the sound field. Moreover, this modification does not destroy the original car parts and can be separated at any time.
Acoustic layout
Many car owners choose to hide the speakers when they are modified. It is built-in, which saves space and is a very practical choice. At the same time, you can also choose speakers with irregular shape, so that you can make the most use of space, and the irregular shape helps to eliminate interference between sound waves.
Horn Tweeter,Voice Coil,Neodymium Magnet Tweeter,Voice Coil Compression Drive
NINGBO BOILINGSOUND ELECTRONICS CO.,LTD , https://www.tweeterspeaker.com