The principle of selecting the cross-sectional area of ​​the incoming line is as follows:
(1) Electric lamp and electric heating load: safe cross-section of conductor cross-section (A) ≥ sum of rated current of all electrical appliances.
(2) Only one motor: the conductor safe current capacity ≥ the rated current of the motor.
(3) Multiple motors: Wire safe current capacity ≥ rated current of one motor with the largest capacity + total rated power of the remaining motor multiplied by the required factor.
(4) The minimum allowable cross-sectional area of ​​the incoming line: the copper wire should not be less than 1.5mm2, and the aluminum wire should not be less than 2.5mm2.
(1) Electric lamp and electric heating load: safe cross-section of conductor cross-section (A) ≥ sum of rated current of all electrical appliances.
(2) Only one motor: the conductor safe current capacity ≥ the rated current of the motor.
(3) Multiple motors: Wire safe current capacity ≥ rated current of one motor with the largest capacity + total rated power of the remaining motor multiplied by the required factor.
(4) The minimum allowable cross-sectional area of ​​the incoming line: the copper wire should not be less than 1.5mm2, and the aluminum wire should not be less than 2.5mm2.
Coaxial Cable RG59 RG6
Conductor: Bare copper or Copper Clad Steel (Solid)
Insulation: Foamed PE
Shield: Aluminum/PET-Foil Bonded
Sheath: PVC (Polyvinyl Chloride)
Applications: Those Coaxial Cables are suitable for Digital, Analog, CATV, Satellite, Off-Air, Broadband
Coaxial Cable, Digital Coaxial Cable, RG59, RG6, CCTV Cable
Shenzhen Bendakang Cables Holding Co., Ltd , https://www.bdkcables.com