The Internet of Things is connected to embedded systems, which brings together two evolutionary technologies, wireless connectivity and smart sensors. Combining the latest advances in low-power microcontrollers, these new "things" are connected to the Internet easily and cheaply, prompting humans to enter the second industrial revolution.
Connecting an embedded system is a small microcontroller-based computer that does not require interface access, and the system interacts with humans using sensors or other advanced detection mechanisms. Sensors collect data and determine that the data is valuable and form the main part of the system, and the term “Internet of Things†means that these sensor networks can also be implemented using protocols, such as wireless domains, using WiFi or Ethernet networks. The network or Bluetooth does not have an IP address. The choice of network protocol is based on the distribution of nodes and the amount of data collected. The data is sent to the main center or computer through the network, and then the computer collects and analyzes the data, stores it in memory, and even analyzes the results based on the system decision.
IoT sensor node block diagram, including 802.15.4 wireless, A / D converter, analog front end, battery management, Bluetooth, cloud storage, custom wireless, DC / DC converter, environmental sensors, flash memory, memory modules, microcontroller, RAM Memory, RFID / NFC, photoelectric sensors, power management, smart sensors, video, wireless networks.
These connected embedded systems are independent microcontroller-based computers that use sensors to collect data. The system network is usually connected via a wireless protocol such as WiFi, Bluetooth, 802.11.4 or a custom communication system. The network protocol is node-based. The amount of data distributed and collected.
The key nodes of the modern Internet of Things need to be encrypted with some form of data security, the most common being AES256. This is critical to helping break security. It should be noted that this design is for reference design only and product recommendations, and there is currently no test compatibility and interoperability.
Smart solar outdoor light with both lighting and RGB colorful lighting, can be charged with USB and solar panel. Once it has sunlight, the solar panel can be automatically charged , the charging way is very environmentally friendly. We added a USB charging way so that it can be quickly charged via the USB cable in cloudy day or rainy day.
The outdoor light is solar-sensing, it will automatically turns off when in the bright enviroment and automatically turn on in the dark.
Equipped with a detachable plastic sticker, it can be used to decorate the lawn, garden, beach... After removing the plastic sticker, it can be placed on the table as an ambient light. Waterproof IP65 makes users no need to worry when used in the rainy day.
The control software and hardware of outdoor solor light are independently developed by our company, based on two different communication protocols: 2.4G and Bluetooth Mesh.
The remote controller is designed exclusively, using 2.4G wireless technology, The signal frequency is low and the attenuation is low when propagating in air or obstacles. Control distance is around 20 meters. Low power consumption makes the remote controller only need 4pcs AA batteries,but can be used for two years.
The App are developed on the most advanced Bluetooth Mesh technology. "LinkupHome" App can be downloaded in the App store or Google Player, then you can control our product without any complicate steps. The App is stable, easy control and multifunctional.
The advantages of Bluetooth Mesh are fast connect, low power consumption, no password required and Ad-Hoc Network. No need WIFI and hubs, as long as you have a Bluetooth-enabled smart phone, you can experience the smart light. When you install several smart bulbs, the self-organizing network function can make the signals free connect, break the limitation of distance.
Product Parameters
Product dimension: 155mm *235mm
Material: ABS+PC
Lamp Color: 8pcs RGB lamp beads+4pcs Warm White lamp beads
Lamp Current: 15-20mA
LED Power: 0.4W(15LM)
Battery Capacity: 3.7V, 1000mA Li-battery included
Charge Mode: Solar panel and a USB
Battery Using time: 9h(by USB charge for 1.5h) , 5h(by solar panel for whole sunny day)
Solar Panel: Monocrystalline silicon
Solar Panel Voltage: 6V
Solar Panel Output: 130mA
Waterproof Level: IP65
Warranty time: 1 Year
Certification: CE(EMC,RED) ROHS,IP65,FCC
Smart Outdoor Solar Lamp,Outdoor Solar Lamp,Smart Mini Outdoor Solar Lamp,Smart RGBW Outdoor Solar Lamp
Ningbo Homey Photoelectric Technology. Co., Ltd , https://www.linkuphome.com