External wall insulation and impact tester - Master's thesis - Dissertation

Brand AVX TPSE226M035R0125 Low impedance tantalum capacitor AVX 22

Test - lowercase jpg

Kaixin micro test

TP-IP4220CZ6 5V 0.35PF breakdown voltage 6V SOT

Test probe P100-M3

product name:

SYL-9

External wall thermal insulation impact tester

product manual:

one,

Overview: External wall thermal insulation impact tester meets

JGJ144-2004

"Technical Regulations for External Wall Insulation"

A.5, B.3

According to the standard of the strip, the device can be tested in the laboratory or in the field for the impact resistance of the external thermal insulation system.

two,

SYL-I

Technical parameters of external wall thermal insulation impact tester

1,

Steel ball weight

0.5kg, 1kg

2,

Impact height adjustment range:

0.6-1.3

Meter

3,

The maximum height of the whole machine:

2.6

Meter

three,

main feature

SYL-9

Wall insulation and impact tester

The utility model has the advantages of simple structure, magnetic ball grabbing mode, height adjustable, convenient operation and operation, and the whole machine can be moved, suitable for indoor and on-site use.

four,

External wall thermal insulation impact tester

Instructions

1

When the wall is inspected on site, the ball stand is placed at the edge of the wall, and the height is adjusted so that the center point of the sphere is aligned with the impact point.

2

, holding the ball grab stand beside, the height of the ball catching device on the scale position on the hanging ball rack, the high scale distance ball impact center

1.02

Meter, low distance ball impact center

0.61

Meter.

3

The rotating ball catching device sucks the ball, moves the ball catching frame, straightens the wire rope, rotates the ball catching device to put the ball, and impacts the wall.