Plug in the device, select the device driver to be uninstalled in the device manager, uninstall the driver, everyone will, but in case the device is plugged into the computer, the blue screen, even the device manager open opportunities are not for you? The solution was found here. This method can also help clean up a lot of useless drivers.
These two days, I played the USB Camera of CrazyBingo. His Camera is made with the USB2.0 chip CY7C68013. The default driver does not support the win764 bit. Need to close the windows mandatory signature. I turned off the driver signature and successfully installed the driver and captured the image after closing. However, when I checked my own USB3.0 development board on my computer, I started the blue screen and turned off the driver signature and the blue screen. No matter what, I plugged it directly into the blue screen. The guess is that the two drive conflicts.
Consider uninstalling the driver first. How to uninstall? All that is said online is to find the device, then click on the device to uninstall. However, when I plug in the device, I will be blue screen right away. I will not give myself the opportunity to uninstall it. What should I do? Can you find the driver disease uninstallation corresponding to the device without the device? The answer is yes.
Start at > cmd, then type in an open command prompt
Setdevmgr_show_nonpresent_devices=1
Then enter: devmgmt.msc
Then in the Open Device Manager, check the option to show "Show hidden devices."
The gray ones were all pre-loaded, and now the device is not connected. Then, find the device driver you want to delete, and delete it slowly. I just deleted a lot in one breath. After the deletion, plug in the USB3.0 development board, and it is not blue screen. problem solved.
EXPLOSION WELDING IN FABRICATION PROCESS
1. Preparation of the metal materials of the cover plate and the base plate (including surface purification treatment);
2. Explosives, cartridges, interstitial objects and protective layer preparation;
3.Process installation on sandy soil foundation;
4.Explosive welding using electric detonator detonation method;
5.Inspection of the surface and appearance quality of the composite board;
6.Non-destructive testing NDT (UT, PT);
7.Destructive organization and performance inspection to determine the quality of the combination;
8. Processing and shaping such as leveling, shearing or turning (heat treatment as required);
9.Factory inspection: inspection of appearance, surface and size, marking and coding;
10.Packaging and leaving the factory;
Our product incluse: Clad Plates; Electrical Transition Joints; Conducting Materials for New Energy; Structural Transition Joints; Cryogenic Transition Joints; Clad Pipes.
Clad Plates; Electrical Transition Joints; Conducting Materials for New Energy; Structural Transition Joints; Cryogenic Transition Joints; Clad Pipes.
Changshu Herun Import & Export Co.,Ltd , https://www.herunchina.com