Punching Wire Cable Drum Bobbin

Model NO.: PND100-1250
Trademark: ONEREEL
Origin: China(Mainland)
Model NO.: PND100-1250
Trademark: ONEREEL
Origin: China(Mainland)
Punching Wire Cable Drum Bobbin

Steel reels are manufactured in accordance with GB4004-83, JB/T7600.3-94
and DlN46395 standards. Used by stainless steel material, such as ss304, ss316,
punched into corrugated type serves as the lateral plate; And its mandrel and major
body are supported by four-groove reinforcing stainless steel bars. The product has
the characteristics of not only strengthening the strength of bobbin, but also having
light weight of bobbin, which can be used for buncher, stranding machine, extruder,
cabling machine and armouring machine.
details as follows,pls kindly check.
 
Serial Number Specification Model Lateral Plate Diameter D1 Major Diameter D2 Axle Hole Diameter D4 Carrying Hole Diameter D5 Center Distance E of Axle Hole and Carrying Hole External Width L1 Internal Width L2
1 800 800 400 80 40 160 600 500
2 1000 1000 500 80 40 160 750 630
3 1120 1120 560 80 40 160 850 710
4 1250 1250 630 80 40 160 950 800
5 1400 1400 710 80 65 300 1060 900
6 1600 1600 800 80 65 300 1180 1000
7 1800 1800 1000 100 65 300 1320 1120
8 2000 2000 1120 1235 65 300 1500 1250
9 2240 2240 1250 125 65 300 1700 1400
10 2500 2500 1500 125 65 300 1900 1600
11 2800 2800 1800 140 65 300 2120 1800
12 3150 3150 2000 160 65 500 2300 2000
13 4000 4000 2800 200 80 500 2300 2000

Punching Wire Cable Drum Bobbin

Punching Wire Cable Drum Bobbin

  Punching Wire Cable Drum Bobbin

Steel reels are manufactured in accordance with GB4004-83, JB/T7600.3-94
and DlN46395 standards. Used by stainless steel material, such as ss304, ss316,
punched into corrugated type serves as the lateral plate; And its mandrel and major
body are supported by four-groove reinforcing stainless steel bars. The product has
the characteristics of not only strengthening the strength of bobbin, but also having
light weight of bobbin, which can be used for buncher, stranding machine, extruder,
cabling machine and armouring machine.
details as follows,pls kindly check.
 
Serial Number Specification Model Lateral Plate Diameter D1 Major Diameter D2 Axle Hole Diameter D4 Carrying Hole Diameter D5 Center Distance E of Axle Hole and Carrying Hole External Width L1 Internal Width L2
1 800 800 400 80 40 160 600 500
2 1000 1000 500 80 40 160 750 630
3 1120 1120 560 80 40 160 850 710
4 1250 1250 630 80 40 160 950 800
5 1400 1400 710 80 65 300 1060 900
6 1600 1600 800 80 65 300 1180 1000
7 1800 1800 1000 100 65 300 1320 1120
8 2000 2000 1120 1235 65 300 1500 1250
9 2240 2240 1250 125 65 300 1700 1400
10 2500 2500 1500 125 65 300 1900 1600
11 2800 2800 1800 140 65 300 2120 1800
12 3150 3150 2000 160 65 500 2300 2000
13 4000 4000 2800 200 80 500 2300 2000

Punching Wire Cable Drum Bobbin

Punching Wire Cable Drum Bobbin

 

Isotropic Ferrite Magnets

Isotropic magnets are magnets with a random direction of magnetization in the magnet.

Magnet powders for isotropic magnets contain crystals in one magnet particle with a direction of random magnetization, and cannot be made anisotropic magnets when a magnetic field is applied externally during molding. In the magnetization after molding, the magnetization of the same component as the direction of the magnetization field becomes strong for the magnetization in a random direction in the crystal. Therefore, the molded body, which is an aggregate of crystals, can be a magnet having a magnetic force in the direction of magnetization

Isotropic Ferrite Magnets,Disc Magnet,Motor Rotor Magnet,Multipole Ferrite Ring Magnet

HU NAN YUBANG MAGNETIC MATERIAL CO.,LTD , https://www.ybmagnet.com