Millet flagship authentic ultra-thin safety lithium polymer mobile power 10000 mAh mobile phone mini charging Po 129 yuan value of friends broke the original: Millet official flagship store No. 15 on the 15th poly worth 129 yuan good value 30 Comments 64 Collection 33 direct links View Details At that time, the price was still high. Of course this is a high version (type c).
2, the landlord to buy the mall and buy linksThe landlord did not buy a high-grade version, which is an ordinary micro-usb port.
Millet (MI) millet mobile power 2 (10000mAh) twilight 79 yuan millet mobile power 2 Appearance with high version close, there are silver and twilight two-color, metal shell in one molding, and the surface has anodized process, has a higher Structural strength and anti-sweat anti-corrosion features. Millet's mobile power supply 2 has a capacity of 10000mAh, and the batteries provide lithium polymer for ATL/Power, which is also consistent with the millet mobile power supply high-profile version. There is a Micro USB input port and a USB-A output port, enter the highest branch Jingdong direct link to encyclopedia The landlord purchased Jingdong Mall and started at a price of 79 yuan.
3, products and accessories
Maintain the usual millet style, simple to the extreme, the power supply body +25cm micro-usb data line.
Product measurements (130 * 71 * 14.1mm). About 3/4 coin thicknesses, 3 and 4/5 dime coin widths, three one-yuan coins plus 2 and 7/8 dime coin lengths.
weight. 221g (official data: 228g), not light.
Capacity of 10000mAh mA, 3.85V, bi-directional fast charge, lithium polymer battery. Input parameters: 5V==2A, 9V/12V==18W. Output parameters: 5.1V==2.4A, 9V/12V==15W MAX. Manufacturer: Jiangsu Zi Mi Electronic Technology Co., Ltd.
Interface, a usb output interface, a micro-usb input interface, four indicator lights, a power display button (and charge start button).
5, work level
Still maintain the original level of millet, work well, but not perfect. It can be seen from the picture that there is an uneven edge gap between the outer shell and the inner shell at both ends of the power supply.
One-piece metal shell brings good texture. Anodized surface treatment process is beautiful, circular arc design and trimming is perfect.
Even if the surface is carefully sandblasted, fingerprint erosion cannot be eliminated. However, relative to the mirror, the performance of this product's anti-fouling ability still has its positive effect, and the fingerprint is not obvious.
When charging input, the indicator light flashes in the way of breathing, one by one to four indicators, when the four indicators are all on and no longer flashes, indicating that the charging input is completed.
Using the Anker 18W QC2.0 charger (output specification: 5V==2.4A, 9V==2A, 12V==1.5A), it can be seen that the input parameter is a specification of 9V==2A. Verify compliance with Qualcomm 2.0 fast charge requirements.
When the mobile power is charged, the indicator light will change to the “breathing†state. Unlike the charging input, the indicator light will flash from one lamp to one lamp, and the last four lamps will all be extinguished.
(1) Output parameters when LeTV pro1 is charged (20% when charging the phone)
Output parameter: 9V, 1.2A (close to this value). The original charger charging specification is 9V, 1.2A.
(2) Charge Lenovo vibe shot (30% charge when charging the phone)
Output parameters: close to 5.2V, 1.4A. Original charger charging specification is 5V, 1.5A.
(3) Charging Huawei 6S mobile phone (61% mobile phone charging)
Output parameters: close to 5.2V, 1.5A. Huawei original charger charging specification is 5V, 1A. With the landlord using anker 2.0 fast charger to charge the phone's parameters are basically the same.
(4) Charging millet 5 mobile phone (30% battery charging)
Output parameters: close to 9V, 1.2A. Millet 5 original charger charging specifications for 9V, 2A.
As for the dismantling, it has been dismantled by the gods. Interested friends may wish to look at the value of 79 yuan worth? Millet mobile power 2 bidirectional fast charge 10000mAh dismantling evaluation ".
9, output capacityThe monitor is used to monitor the amount of electricity at the beginning of charging and the last state of no electricity, and the difference between the two is the actual amount of electricity actually output.
After the mobile power supply is fully charged, the initial power output is 60.527 Ah (actually 60.523 Ah, resulting in slight errors due to delay in photographing).
Ultimately no electricity status, the recorded amount of electricity is: 66.371Ah.
(1) It is almost impossible to set specific conditions for the official test and to meet the official setting conditions for the individual test.
(2) This test mobile power was tested after being used for a period of time, and there was a slight loss in the battery.
(3) The test is divided into three separate tests, and there are two mobile phones that are not in the off state and will lose part of their power during the charging process.
(4) Monitoring the test equipment will also consume some electricity.
[Comprehensive conclusion]
★★★★ (up to five stars): (1) The overall performance of this model of mobile power is good, the input parameters meet Qualcomm 2.0 fast charging standards, but the output parameters are slightly weaker, can not fully comply with Qualcomm 2.0 fast charging standards; (2) work The performance is good, and it is better than the 10400mAh version. In terms of face value, the individual thinks it is fairly good, and the flatter treatment brings a good feeling. The rounded chamfers on both sides no longer have the sharp right-angle cutting edge. 3) Although the weight is not light, but the safety of all metal frame manufacturing can not be ignored; (4) charging input, output time are not short (limited by the output power), but considering its positioning (temporary Safeguarding uses, this deficiency is not enough to be the biggest obstacle to selection. If you have to use it as a quick charger, you can only say that you selected the wrong one. (5) The actual output power should be good.
The self photographing lever is a popular self photographing artifact in the world. It can be extended and retracted arbitrarily between 20 cm and 120 cm. Users only need to fix the mobile phone or fool's camera on the telescopic lever, and multi angle self photographing can be realized through the remote control.
The technical design of the self timer lever is not complex. It is mainly composed of the self timer lever, fixed bracket, Bluetooth remote control self timer or bottom button. The fixed bracket can hold mobile phones, cameras and even tablet computers. The freely adjustable telescopic lever brings a wider shooting angle, and the operation can be controlled through the Bluetooth button at the bottom of the lever.
Selfie Stick,Mobile Selfie Stick,Bluetooth Selfie Stick,Flexible Selfie Stick
shaoxing shangyu Tianya Photographic Equipment Factory , https://www.tianyafoto.com