How to maintain the headset

How to maintain the headset

We all know that when new things start, they will learn how to carry out maintenance, not just mobile phones, computers, clothes... In fact, everything is in need of maintenance. Let's learn how to maintain the headset today!

When the new headset is started, we first need to unpack the headset from the box (this is certainly the first step, of course) but some of the headphones themselves are of poor quality, plus our usual use process. It is not improper to operate, it is easy to eliminate our beloved headphones too early.

When using headphones, pay attention to the following aspects:

1. It is best not to wear headphones when you are sleeping. Sleep can not be fixed overnight, the headphone cord may be wrapped around the neck or the two headphone cords twisted together with a twist, and the large headphone or even the housing would be crushed.

2. Wipe the sweat on the headphone cable after using the headphones. These things secreted by the human body, containing fat or something, make the invisible killer of the wire, at the bend of the ear. After a long time, the wire rod will age, eventually leading to cracks and cracks.

3. It is best not to smoke when using headphones. Accidentally, the earphone shell and headphone cord will be burned. In addition, soot will enter the earphone shell and stick to the diaphragm, and the sound will be wrong for a long time.

4. Be sure to turn off the volume before use. If the volume of your output device is too loud, not only will your ears be shaken, but lighter membranes will wrinkle. Seriously burned the voice coil of the headphones.

5. Keep headphones away from strong magnets. The magnetic properties of the magnets of the unit will decrease and the sensitivity will decrease over time!

6 Keep your headphones away from moisture. The pad in the headphone unit gets rusted and the resistance increases, and your headphones will be in a biased manner.

7. Plug part. Some friends like to put mp3 on the trouser pocket, and the outlet part of the plug is very easy to fold. It will break for a long time.

8. Do not disassemble. Curiosity is so strong that I want to take a look at the headphones. Some headphones are difficult to open, some headphones can not be opened without special methods, even if opened, 80% will make the headset can not continue to work or there is a sound.

9. It is best not to use it outside during winter. In winter, the wire is hard and brittle. Excessive bending can easily break the wire. Do not heat the headphone cable at this time. High temperatures will accelerate the aging of the wire.

As long as you use it carefully in your life, you can extend the life of your headphones.

VoltaTech's patented Composite resonant pulse technology is the best in the world , Through intelligent pulse being resonant with sulfated crystals, restore battery vitality, and prolong the service lifespan of the battery without any damage to the battery physical structure and plates.
Battery Smart Pulse Restore System fully take into account the inconsistent of the physical resonance frequency between lead sulfate crystal and battery plates, select the optimal frequency of pulse waveform and pulse current intensity to "break" and "decompose" the lead sulfate crystals, ensure the best restoration effect of sulfide battery without any damage to the plates.
Off-line Battery Smart Pulse Restore System also be called Battery Pulse Rejuvenator or Battery Life Saver: mainly used in the whole industry of electric forklift industry, Logistics, Sightseeing car, Golf Cart, Marine applications, wind and solar energy storage applications, UPS Back up power system, Telecom base site, State Grid and Military battery for Sudden affair, Deep cycle and Stationary battery etc.

The system is composed of 3 parts and a professional standard restore process: 1) Restorer Device; 2) Digital Pulse Charger; 3) Discharge of Capacity Tester.  Lead-Acid Battery Restoration system and Solution is applicable to all of Lead Acid Battery(AGM, GEL, VRLA, MF, Flooded, Dry, Traction, Deep cycle and Stationary), and widely used in 2V(200~3000Ah)/6V12V(4.5~300Ah) cell batteries. 

Battery Smart Pulse Restore System
As we know, the improperly use or maintenance of batteries is the most important reasons of the lead-acid battery sulfation and failure. Therefore, repair lead-acid battery is a systems engineering, which requires the use of specialized equipment for regular restore battery, also need professional maintenance to remove sulfation circularly and regularly based on the size and condition of the individual battery
We committed to providing the lead-acid battery pulse restore system and solution for users, including: off-line repair and restore device, professional routine maintenance, and on-line Battery Protector System.

Battery Smart Pulse Restore System

Battery Smart Pulse Restore System,Battery Pulse Protector,Pulse Tech Smart Battery Chargers,Lead-acid Battery Pulse Recover

Shenzhen Daceen Technology Co., Ltd. , https://www.daceen-sz.com