Bare Copper Conductor PE XLPE Insulated Aluminium Mylar Tape Screen Galvanized Steel Wire Armoured Instrument Cable

• Model NO.: Instrument Cable BL62
• Voltage: Low and Medium Voltage Cable
• Insulation Material: XLPE PE
• Material Shape: Round Wire
• Certification: ISO, CCC, CE
• Brand: Yifang
• Transport Package: Wooden Drum
• Origin: Henan Province, China

• Application: Telecommunication
• Current: AC Cable
• Sheath Material: PVC
• Wire Core Material: Bare Copper Wire
• Model: Instrument Cable
• Trademark: Yifang
• Specification: 6 pair x 1.5mm2
• HS Code: 8544492100

Bare Copper Conductor PE XLPE Insulated aluminium mylar tape Screen Galvanized steel wire Armoured Instrument Cable

Application                                                                                                                                                       
For transmission of analogue and digital signals in instrument and control systems; use in zone 1 and zone 2 group
ΙΙ classified areas (IEC 60079 part 14). Not allowed for direct connection to low impedance source, e.g. the public
mains electricity supply.
Recommended for direct burial. For indoor and outdoor installation in dry and wet locations on racks, in conduits.
1. Conductor: Plain annealed copper, sizes: 0.5 mm² solid, 1.0 mm² solid, 0.5 mm² flexible, 0.75 mm² flexible or 1.5mm²          
                         stranded
2. Insulation: Polyethylene PE
Colour code: black / blue;
with numbered tape under separator tape of the pair screen
3. Pair screen: 24 µm aluminium / PETP tape over tinned copper drain wire, 0.5 mm²
4. Collective screen: 24 µm aluminium / PETP tape over tinned copper drain wire, 0.5 mm²
5. Bedding: polyethylene PE, black
6. Armour: galvanized round steel wires
7. Outer sheath: Polyvinyl chloride PVC, black
                              *Flame retardant
                              *Oil resistant,
                              *Anti-rodent&termite
These properties could be offered upon requested.
Technical Data                                                                                                                                    
 Temperature range:
-40°C up to +70°C (during operation)
- 5°C up to +50°C (during installation)
Min. bending radius:
8 x cable-Ø


 

Dip Plug IDC Connector

Antenk dip plug connector Insulation Displacement termination connectors are designed to quickly and effectively terminate Flat Cable in a wide variety of applications. The IDC termination style has migrated and been implemented into a wide range of connector styles because of its reliability and ease of use. Click on the appropriate sub section below depending on connector or application of choice.the pitch range from 1.27mm,2.0mm, and 2.54mm here.

IDC DIP Plug Connectors Key Specifications/Special Features:
Materials:
Insulator: PBT, glass reinforced, rated UL94V-0
Contact: phosphor bronze or brass
Electrical specifications:
Pitch: 1.27/2.0/2.54mm
Current rating: 1A, 250V AC
Contact resistance: 30M Ohms (maximum)
Insulation resistance: 3,000M Ohms, minute
Dielectric withstanding voltage: 500V AC for one minute
Operating temperature: -40 to +105 degrees Celsius
Terminated with 1.27mm pitch flat ribbon cable
Number of contacts: 06,08, 10, 12, 14, 16, 20, 24, 26, 30, 32,34, 40, 50, 60 and 64P
With RoHS mark
Used for ribbon cables

DIP Plug Connectors Application

Wire to Board
Apply to Industries : PC, IPC, Consumer Electronics, Automotive, Home Appliance, Medical

Dip Connector,Dip Plug Connector,Dip Direct Pulg Connector,IDC Plug Connector,Idc connector dip plug,1.27mm Dip Plug Connector,2.0mm Dip Plug Connector, and 2.54mm Dip Plug Connector

ShenZhen Antenk Electronics Co,Ltd , https://www.antenkcon.com