Description
RUBLS-EPDM a series of open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. They are supplied for field installation in this pre-stretched condition. The core is removed after the tube has been positioned for installation over an in line connection, terminal lug, etc., allowing the tube to shrink and form a waterproof seal. The insulating tube is made of EPDM rubber, which contains no chlorides or sulphurs. Various diameter sizes will cover a range of 1000 volt cables, copper and aluminum conductors.
Unique Advantages
Excellent weather resistance, ultraviolet aging resistance and higher embrittlement resistance than heat shrink tubing
More resistant to slab and prick, abrasion, acid and alkali than silicone cold shrink tubing
Simultaneously expands and shrinks with workpieces without clearances, seals tight in harsh  environment
Stably sealing the workpieces in windy environment
Well suited for cable less than 1KV
Seals tight, retains its resiliency and pressure even after prolonged years of ageing and exposure.
Simple , safe installation, requires no tools or special training. No torches or heat work required.
Diameter shrinkage:≥50%
Sealing class IP68
Applications
Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splices rated to 1000volts
Meets ANSI C119.1, directly buriable or submersible
For indoor, outdoor, or overhead use
Physical protection and moisture sealing for high-voltage, air-insulated connectors and lugs such as spacer cable and lug connections to bus bar
Insulation of secondary splices copper or aluminum conductors
Relocation of service
Dig-in repairs, sheath repairs
Insulation of inline conductor transition connectors
Sealing of coax cables with Type N or 7/16 DIN connectors on wireless communication towers
Technical Performance
Â
Properties |
Typical Data | Test method |
HS | 49 A | ASTM D 2240 |
Tensile Strength | 11.8 MPa | GB/T 528 |
Elongation at break | 641% | GB/T 528 |
Tear Strength | 38.6 N/ mm | ASTM D 624 |
Dielectric Strength | 19.1 kV/mm | ASTM D 149 |
Dielectric Constants | 5 | 90ºC(in water) 7 days(1940F)5.6 |
Anti-enzyme (bacteria) | The 28 day exposure without growth | ASTM G-21 |
UV Resistant | UV irradiation for 2000 hours without aging  |
ASTM G-53 |
Dimensions
 Â
Spec. | Corresponding 3M's modle |
Inner Diameter D(mm) | Min Cable Outer diameter (mm) | Max Cable Outer Diameter (mm) | Recovered Length L(mm) |
VE18-3 |
 |
18 | 7.8 | 14.3 | 80 |
VE18-6 | 8423-6 | 18 | 7.8 | 14.3 | 152 |
VE18-7 | 8424-7 (*) | 18 | 7.8 | 14.3 | 178 |
VE25-7 | 8425-7 | 25 | 10.1 | 20.9 | 178 |
VE25-8 | 8425-8 | 25 | 10.1 | 20.9 | 203 |
VE25-11 |
 |
25 | 10.1 | 20.9 | 279 |
VE25-12 |
 |
25 | 10.1 | 20.9 | 305 |
VE28-5 | CXS-1 (*) | 28 | 8.0 | 22.5 | 125 |
VE35-6 |
 |
35 | 13.9 | 30.1 | 152 |
VE35-8 |
 |
35 | 13.9 | 30.1 | 203 |
VE35-9 | 8426-9 | 35 | 13.9 | 30.1 | 229 |
VE35-11 | 8426-11 | 35 | 13.9 | 30.1 | 279 |
VE42-6 | 8427-6 | 42 | 16.8 | 35.1 | 152 |
VE42-8 |
 |
42 | 16.8 | 35.1 | 203 |
VE42-10 |
 |
42 | 16.8 | 35.1 | 254 |
VE42-12 | 8427-12 | 42 | 16.8 | 35.1 | 305 |
VE42-16 | 8427-16 | 42 | 16.8 | 35.1 | 406 |
VE42-18 |
 |
42 | 16.8 | 35.1 | 457 |
VE50-8 | CXS-2 | 50 | 13.5 | 43.7 | 203 |
VE58-6 | 8428-6 | 58 | 24.0 | 49.3 | 152 |
VE58-7 |
 |
58 | 24.0 | 49.3 | 178 |
VE58-8 |
 |
58 | 24.0 | 49.3 | 203 |
VE58-10 |
 |
58 | 24.0 | 49.3 | 254 |
VE58-12 | 8428-12 | 58 | 24.0 | 49.3 | 305 |
VE58-18 | 8428-18 | 58 | 24.0 | 49.3 | 457 |
VE58-24 | 8428-24 | 58 | 24.0 | 49.3 | 610 |
VE58HP-10 | 98KC-21 (*) | 58 | 20.5 | 51.0 | 254 |
VE65-10 | CXS-3 (*) | 65 | 23.7 | 57.5 | 254 |
VE77-6 | 8429-6 | 77 | 32.2 | 67.8 | 152 |
VE77-7 |
 |
77 | 32.2 | 67.8 | 178 |
VE77-9 | 8429-9 | 77 | 32.2 | 67.8 | 229 |
VE77-12 | 8429-12 | 77 | 32.2 | 67.8 | 305 |
VE77-13 |
 |
77 | 32.2 | 67.8 | 330 |
VE77-14 |
 |
77 | 32.2 | 67.8 | 355 |
VE77-18 | 8429-18 | 77 | 32.2 | 67.8 | 457 |
VE77-22 |
 |
77 | 32.2 | 67.8 | 550 |
VE77HP-13 | 98KC-31 (*) | 77 | 27.4 | 70.0 | 330 |
VE105-8 |
 |
105 | 42.6 | 93.7 | 203 |
VE105-9 | 8430-9 | 105 | 42.6 | 93.7 | 229 |
VE105-18 | 8430-18 | 105 | 42.6 | 93.7 | 457 |
VE105-20 |
 |
105 | 42.6 | 93.7 | 508 |
VE120-24 |
 |
120 | 33.0 | 114.3 | 610 |
VE160-24 |
 |
160 | 60.0 | 154.0 | 620 |
 Cable protective shrinkable rubber EPDM cold insulation material
Description
RUBLS-EPDM a series of open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. They are supplied for field installation in this pre-stretched condition. The core is removed after the tube has been positioned for installation over an in line connection, terminal lug, etc., allowing the tube to shrink and form a waterproof seal. The insulating tube is made of EPDM rubber, which contains no chlorides or sulphurs. Various diameter sizes will cover a range of 1000 volt cables, copper and aluminum conductors.
Unique Advantages
Excellent weather resistance, ultraviolet aging resistance and higher embrittlement resistance than heat shrink tubing
More resistant to slab and prick, abrasion, acid and alkali than silicone cold shrink tubing
Simultaneously expands and shrinks with workpieces without clearances, seals tight in harsh  environment
Stably sealing the workpieces in windy environment
Well suited for cable less than 1KV
Seals tight, retains its resiliency and pressure even after prolonged years of ageing and exposure.
Simple , safe installation, requires no tools or special training. No torches or heat work required.
Diameter shrinkage:≥50%
Sealing class IP68
Applications
Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splices rated to 1000volts
Meets ANSI C119.1, directly buriable or submersible
For indoor, outdoor, or overhead use
Physical protection and moisture sealing for high-voltage, air-insulated connectors and lugs such as spacer cable and lug connections to bus bar
Insulation of secondary splices copper or aluminum conductors
Relocation of service
Dig-in repairs, sheath repairs
Insulation of inline conductor transition connectors
Sealing of coax cables with Type N or 7/16 DIN connectors on wireless communication towers
Technical Performance
Â
Properties |
Typical Data | Test method |
HS | 49 A | ASTM D 2240 |
Tensile Strength | 11.8 MPa | GB/T 528 |
Elongation at break | 641% | GB/T 528 |
Tear Strength | 38.6 N/ mm | ASTM D 624 |
Dielectric Strength | 19.1 kV/mm | ASTM D 149 |
Dielectric Constants | 5 | 90ºC(in water) 7 days(1940F)5.6 |
Anti-enzyme (bacteria) | The 28 day exposure without growth | ASTM G-21 |
UV Resistant | UV irradiation for 2000 hours without aging  |
ASTM G-53 |
Dimensions
 Â
Spec. | Corresponding 3M's modle |
Inner Diameter D(mm) | Min Cable Outer diameter (mm) | Max Cable Outer Diameter (mm) | Recovered Length L(mm) |
VE18-3 |
 |
18 | 7.8 | 14.3 | 80 |
VE18-6 | 8423-6 | 18 | 7.8 | 14.3 | 152 |
VE18-7 | 8424-7 (*) | 18 | 7.8 | 14.3 | 178 |
VE25-7 | 8425-7 | 25 | 10.1 | 20.9 | 178 |
VE25-8 | 8425-8 | 25 | 10.1 | 20.9 | 203 |
VE25-11 |
 |
25 | 10.1 | 20.9 | 279 |
VE25-12 |
 |
25 | 10.1 | 20.9 | 305 |
VE28-5 | CXS-1 (*) | 28 | 8.0 | 22.5 | 125 |
VE35-6 |
 |
35 | 13.9 | 30.1 | 152 |
VE35-8 |
 |
35 | 13.9 | 30.1 | 203 |
VE35-9 | 8426-9 | 35 | 13.9 | 30.1 | 229 |
VE35-11 | 8426-11 | 35 | 13.9 | 30.1 | 279 |
VE42-6 | 8427-6 | 42 | 16.8 | 35.1 | 152 |
VE42-8 |
 |
42 | 16.8 | 35.1 | 203 |
VE42-10 |
 |
42 | 16.8 | 35.1 | 254 |
VE42-12 | 8427-12 | 42 | 16.8 | 35.1 | 305 |
VE42-16 | 8427-16 | 42 | 16.8 | 35.1 | 406 |
VE42-18 |
 |
42 | 16.8 | 35.1 | 457 |
VE50-8 | CXS-2 | 50 | 13.5 | 43.7 | 203 |
VE58-6 | 8428-6 | 58 | 24.0 | 49.3 | 152 |
VE58-7 |
 |
58 | 24.0 | 49.3 | 178 |
VE58-8 |
 |
58 | 24.0 | 49.3 | 203 |
VE58-10 |
 |
58 | 24.0 | 49.3 | 254 |
VE58-12 | 8428-12 | 58 | 24.0 | 49.3 | 305 |
VE58-18 | 8428-18 | 58 | 24.0 | 49.3 | 457 |
VE58-24 | 8428-24 | 58 | 24.0 | 49.3 | 610 |
VE58HP-10 | 98KC-21 (*) | 58 | 20.5 | 51.0 | 254 |
VE65-10 | CXS-3 (*) | 65 | 23.7 | 57.5 | 254 |
VE77-6 | 8429-6 | 77 | 32.2 | 67.8 | 152 |
VE77-7 |
 |
77 | 32.2 | 67.8 | 178 |
VE77-9 | 8429-9 | 77 | 32.2 | 67.8 | 229 |
VE77-12 | 8429-12 | 77 | 32.2 | 67.8 | 305 |
VE77-13 |
 |
77 | 32.2 | 67.8 | 330 |
VE77-14 |
 |
77 | 32.2 | 67.8 | 355 |
VE77-18 | 8429-18 | 77 | 32.2 | 67.8 | 457 |
VE77-22 |
 |
77 | 32.2 | 67.8 | 550 |
VE77HP-13 | 98KC-31 (*) | 77 | 27.4 | 70.0 | 330 |
VE105-8 |
 |
105 | 42.6 | 93.7 | 203 |
VE105-9 | 8430-9 | 105 | 42.6 | 93.7 | 229 |
VE105-18 | 8430-18 | 105 | 42.6 | 93.7 | 457 |
VE105-20 |
 |
105 | 42.6 | 93.7 | 508 |
VE120-24 |
 |
120 | 33.0 | 114.3 | 610 |
VE160-24 |
 |
160 | 60.0 | 154.0 | 620 |
Â
Could you share which points you care more when choose a teacher laptop? Size, cpu, storage, memory, battery, screen, fingerprint or backlight? As one of the top laptops for teachers in 2022, this 15.6 inch celeron N5095 or J4125 online teaching laptop is of the special necessary features a laptop for online teaching has. For example, high quality 1080P screen, bigger battery, updated storage and memory, mid-level cpu, etc. So many clients choose this model as laptop for teachers malaysia or laptops for teachers program.
Of course, there are other type Education Laptop, like 14 inch windows 10 64 gb Student Laptop, 15 inch 10th good laptops for university students, 16.1 inch i7 9th hq 4gb video graphic laptop, etc.
If you have other type device interest, just let us know since we also customize android or windows tablet, Mini PC and All In One PC.
Believe always have a right one meeting your special demand, no matter for student project, business tender, academic institution or reselling.
Teacher Laptop,Online Teaching Laptop,Top Laptops For Teachers,Laptop For Teachers Malaysia,Laptops For Teachers Program
Henan Shuyi Electronics Co., Ltd. , https://www.shuyilaptop.com